Virus Sampling Tube Inactivated & Non-inactivated
【product name】
Single-use virus sampling tube (inactivated & non-inactivated)
【Model Specification】
Single-use virus sampling tube (inactivated & non-inactivated) Specifications: Type A (with swab), Type B (without swab)
Single-use virus sampling tube (inactivated & non-inactivated) Model: MVTM-2A, MVTM-5A, MVTM-10A, MVTM-2B, MVTM-5B, MVTM-10B,
【expected usage】
Single-use virus sampling tube (inactivated & non-inactivated) Used for sample collection, transportation and storage, etc.
【Main composition】
Consists of sampling tube, flocking swab, preservation solution, etc., non-sterile provided
[Storage conditions and validity period]
Single-use virus sampling tube (inactivated & non-inactivated) Storage conditions: valid at room temperature: 12 months
【Sample requirements】
Specimens should be transported to the corresponding laboratory within 3 working days after collection, and the storage temperature should be 2-
8°C; if it cannot be delivered to the laboratory within 72 hours, it should be stored at -70°C or below, and the specimens should avoid repeated freezing and thawing.
Single-use virus sampling tube (inactivated & non-inactivated)
【Instructions】
1. According to sampling requirements, collect samples with sampling swabs.
2. Place the sampling swab after collecting the sample into the sampling tube.
3. Break the swab at the fragile cut-off point of the sampling swab rod and discard the tail.
4. Tighten the sampling tube cover.
5. Mark the information as required on the label of the sampling tube.
6. The specimen should be transported to an inspection laboratory with inspection capability within 3 working days after collection, and
The storage temperature is 2-8°C; if it cannot be delivered to the laboratory within 72 hours, it should be stored at -70°C or below, and the specimens should avoid repeated freezing and thawing.
7. Specific sampling methods can refer to the following:
1) Pharyngeal swab specimen: Use a special sampling swab to wipe the posterior wall of the pharynx and the tonsils on both sides with moderate force, avoid touching the tongue; quickly immerse the swab head in the sampling liquid, and the sampling swab rod is easy to break Break the swab at the intercept point and discard the tail. (Applicable to sampling of this product)
2) Nasal swab specimen: use a special sampling swab, gently insert the swab head into the nasal palate in the nasal passage, and stay the piece
Slowly rotate and exit after engraving; quickly immerse the swab head in the sampling liquid, break the swab at the fragile intercept point of the sampling swab rod, and discard the tail. (Applicable to sampling of this product)
