How to choose and use sampling swabs

Although it has been a year since the outbreak of pneumonia in COVID-19 in 2020, it seems that COVID-19 has not stopped his footsteps, but is even worse than before. The market demand for sampling swabs is still rising, so how should we choose and use sampling swabs?

Sampling swabs of Medico Technology Co.,Ltd is has been tested by the Medical Device Testing Center. As a result, this product has no irritation to skin.1. Pay attention to the packaging marks when using, and check whether the packaging is damaged. If it is damaged, it is strictly prohibited to use it; 2. This product is disposable, cannot be reused, and is destroyed after use; 3. When using, pay attention to the expiration date of the product, and the expired product is strictly prohibited; 4, according to the medical waste treatment method after use.

Sterilization and packaging methods: 1. sterilize the product with ethylene oxide (valid period: 2 years) 2. The paper and plastic packaging which is convenient for sterilization is adopted internationally. 3. Each set in the big packing box is packaged independently, which is convenient to use 4. Different media (bacteria, virus, mycoplasma, chlamydia) were selected for different specimen types .

Special storage conditions and methods: The packaged products should be stored at 2℃ ~ 30℃ and the relative humidity is 40% ~ 90% Our nasal swab has many advantages, first of all, it is soft and will not cause trauma. Soft poles can be flexible and can collect samples better.

Usage:

Step 1: Tear off the sealing paper on the packing tape of the sampling swab, and gently take out the sampling swab from the bag. Pay attention to the sampling swab not touching other objects except the inner wall of nasal cavity, so as to avoid contamination. Step 2: Hold the sampling swab and gently insert it into the nasal palate in the nasal passage. After 3-5 turns, the stop for a minute slowly rotates and exits. Take another swab and collect the other nostril in the same way. Step 3: Immerse the two swabs in the same tube containing 3ml of sampling solution, discard the tail, and screw the tube cover. Send for inspection in time.